Dick's Help Finder
Thanks for dropping by! Add tothis guestlog. REPLY is prefered so others can
see your input. You will probably need to use Refresh to
see your entry if you just added to the log.
Home
| : |
Subject: Pony Colors I have just purchased a MH Pony, I was told it is a 51 by the previous owner. The serial tag is unreadable. It has been painted over, but under the red paint appears to be gray, not a primer. I see that in 54 they may have been painted gray. I would like to paint it the original color if possible. I was also told that MH red is the same as MF red. I would appreciate if anyone could give me some info so that I can get it painted right, Thank You. Joe Joe Schneider <laxhok137@aol.com<>>Yorktown Hts, NY USA Subject: Pony Colors I have just purchased a MH Pony, I was told it is a 51 by the previous owner. The serial tag is unreadable. It has been painted over, but under the red paint appears to be gray, not a primer. I see that in 54 they may have been painted gray. I would like to paint it the original color if possible. I was also told that MH red is the same as MF red. I would appreciate if anyone could give me some info so that I can get it painted right, Thank You. Joe Joe Schneider <laxhok137@aol.com<>>Yorktown Hts, NY USA Subject: MH 101 I have started to restore a 101 Senior and I would like to know how the side panels are held in place and latched. If there are any pictures out there I would appreciate the help. I also would like to know what the best paint would be for this unit possibly with codes. Thanks. Harry Schoepp <hschoepp@canadasurfs.ca<>>Spruce Grove, Ab Canada Subject: Re: how to attach plow Bolt plow clevis to tractor drawbar.Make sure locking jaw on plow tongue is well lubricated and open.Reverse tractor slowly (while helper, or block holds plow tongue at the correct height) until clevis forces jaw to rotate and the release pedal on top to move with an audible click to the locked position.Try pulling forward gently to make sure it's locked before hooking up your trip-rope! Ted <pcowdell@idirect.com<>>Port Perry , Ontario Canada Subject: Massey Harris 44 We have a 1952 44BR and a 1954 44D1RF Massey Harris. Does anyone have any info on the Butane 44? We think this is rare and one of 460 but do not know much about it. Thanks. Kami <kllane@netzero.net<>>Chelsea, IA USA Subject: MH101Jr. Brake drums I am looking for a set of good brake drums. Mine are shot. Anyone know of good sources? Or a way to fix thinned and badly pitted drums? Erik Hegre <viking165@att.net<>>Dayville, Ct USA Subject: Re: Need some HELP please !!! I&T has just re-released the shop manual for these. check with your local tractor dealer Erik Hegre <viking165@att.net<>>Dayville , Ct USA Subject: Re: 1946 101 Jr twin power In 1946 The enging used was a 162ci continental check the block on the lower right side just above the oil pan at the back. There should be a number cast in it. F162-350 was the gas version. As far as brake linings, I just found a set for a JD through Tisco. I dont have the numbers handy but I can send you them tommorow if thats OK. 4 linings and rivets were about $30. You'll just have to find someone with a brake lining rivet tool. They are a perfect match. Erik Hegre <viking 165@att.net<>>Dayville, Ct. USA Subject: Serial Numbers ? I just bought what I believe is a Massey Harris model 55. It has the belt drive on the right hand side as you sit on the tractor. The only numbers I could find on it were: 7479A on top of the transmission plate with 8-48 directly below it, and an engine plate MFA226620211. It is a 6cyl engine and I really need help in identifying it. Thanks! Mahlon Lofton Mahlon Lofton <abalone_shell06@yahoo.com<>>Lincoln, NE USA Subject: Paint Code Massey 201 Hi Mr Carroll, is there a preferred or more accurate paint code for the 201? What would you use? I am new to this. Thanks. Cliff Geiger <cliff.geiger@sasktel.net<>>Regina, Sk Canada Subject: Massey-Harris-Ferguson 1957 ? Hello, I was told you might be able to help me with when and where my tractor was made. Whatever you can tell me would be appreciated. It is a Massey Harris Ferguson with the serial number of SGM172401. There is a tag on the motor but I can't read it but on the block the number is Z134A500P and on the transmission the number is MHF182-840-M1. The man I bought it off of said he thought it was a 1956 but I think it is a 1957. Any information you can provide would be helpful. Also I found on another website that starting with the serial #171741 the plates show Massey-Ferguson. I was wondering about that too. Thank You paul4bass@yahoo.com Paul <paul4bass@yahoo.com<>>Strafford, MO USA Subject: Massey-Harris-Ferguson 1957 ? Hello, I was told you might be able to help me with when and where my tractor was made. Whatever you can tell me would be appreciated. It is a Massey Harris Ferguson with the serial number of SGM172401. There is a tag on the motor but I can't read it but on the block the number is Z134A500P and on the transmission the number is MHF182-840-M1. The man I bought it off of said he thought it was a 1956 but I think it is a 1957. Any information you can provide would be helpful. Also I found on another website that starting with the serial #171741 the plates show Massey-Gerguson. I was wondering about that too. Thank You paul4bass@yahoo.com Paul <paul4bass@yahoo.com<>>Strafford, MO USA Subject: Massey Fergusen 165 I have a Massey Fergusen 165 with a continental gas engine. Was doing engine rebuild (in-frame) and broke a connecting rod bolt. Found out after that Continental went out of business over 20 years ago. The engine is a G-176 Continental gas engine. Where can i find a connecting rod bolt? Doug <djlane@dmv.com<>>Hurlock, MD USA Subject: Massey Harris Pony Just acquired a 1954 Massey Harris Pony, under a lean-to where it was parked about eight years ago. Includes a Kub-Kutter belly mower. Appears to be all mechanically complete Sheet metal good. but needs a total restoration. Missing the cowling that goes over the radiator, just above the grill. Anybody know where one may be found? Bill Powell <brandysir1@bellsouth.net<>>Cumming, GA USA Subject: Massey Harris Serial Number Question >The tractor appears to be a 44G1 (not sure what the 1 means). Serial number is 14646. I found this information under the PTO lever and have not been able to verify the year. Can you let me know what these numbers represent along with the model year? I also would like to know what manuals I should order for this tractor in order to perform service/maintenace. Thank you, cz1386 cz1386 <chris_zito@ameritech.net<>>Tallmadge, OH USA Subject: Need distributor for 1952 Massey Harris Pony Can you tell me where I can find a distributor for a 1952 Massey Harris Pony? IAD60032A76 is the number on it. Thanks for any help. Teresa <tstrebeck@yahoo.com<>>Alba, TX USA Subject: mounted cultivators for Mh 30 Looking for a set of cultvators for this tractor, any one have a set they wish to part with! Bill Shaver Bill Shaver <mrcanoehead@canoemail.com<>>ft plain , ny USA Subject: what model of tractor do I have THE owner says it is a 1948 massey ferguson but history says it is a massey harris. Ferguson and Massey harris didn't merge until 1953. Is this right? Any way the I.D. tag on the left side of the engine is: MFB124g8844. Are there other numbers to look at. No decals are on the body of this tractor. Can you help me as to what tractor I have. Rick Miller <SCuttingedge@AOL.com<>>Lasalle, mi USA Subject: massey harris 30 I'm trying to get the rear hubs off to replace the seals. All bolts are out, and have been soaking with penetrating oil , but no success. any ideas would be appreciated. Ron Besco <r.besco@mchsi.com<>>Eddyville , IA USA Subject: Re: Massey's On my 52 Mustang the serial number is also stamped on the top of the transmission case. You might find it there. Donald Gover <dongover@yahoo.com<>>Pleasant Grove, UT USA Subject: MH super 101 I need to know if someone could tell me were I could get a cap and rotor for my super 101. I cant read the dist. numbers what dist. could I replace it with if I cant find parts? Justin <justin4002002@yahoo.com<>>smithton, mo USA Subject: Massey Harris/JI Case Plow Works-Stalk Cutter Looking for info or pics of a Massey Harris/J.I. Case plow works 1 row stalk cutter. It is horse drawn. It has "1343" on the foot boards. I am wanting to restore it and looking for info . Thanks Buster Buster Guffy <buster501@vuewifimail.com<>>judsonia, Ar USA Subject: Massey Harris 20 std I am looking for a good set of fenders and a good grill. andrew Reeves <aoreeves@att.net<>>Baldwinsville, NY USA Subject: Blocf of engine continental z134 to MHF 50 Good day, excuses my ingles...... I am recovering a Tractor Massey Harris Ferguson 50, year 1956 or 1957. I need to buy the block of the continental motor z134 for the tractor or the complete motor. I am thankful to him inform to me where I can locate it. Thanks, J. Canelon Note: If it is better Miami by cercania to Sudamenrica. Jesus Canelon <canelonje@hotmail.com<>>Caracas, D.F Venezuela Subject: Needed: Main jet for Massey Harris Pacer Carb, Model TSX 541 Need help finding a main, or power, jet for this tractor. Old jet twisted off when trying to remove. Any help is greatly appreciated. Bill Luxumberg <H_U_B_B_U_B@yahoo.com<>>Sparta, WI USA Subject: 1946 101 Jr twin power I bought my first Massey Harris last summer which I am currently restoring to use around my property and am having a little trouble. First I need new brake liners but am having difficulty finding the material to reline the brake bands. Also during tear down found 1 rear hub was broken in two and bolted to wheel having hard time finding replacement. Lastly engine plate is unreadable wondering if any other way to retrieve numbers to identify which continental engine is powering this tractor. Love your site and hope to see your collection one day. Any help would be greatly appreciated. Almost forgot also have quick lift on tractor know anywhere to get all the exterior components. Shelby Snyder <shortmar2003@yahoo.com<>>De Graff, OH USA Subject: I have a 1952 Massey Harris Pony. I am lookin for a hydraulic cylinder,for a lift. Lawrence Hobson <ahobson001@triad.rr.com<>>Winston Salem, NC USA Subject: Massey Harris Pony Carb. Can anyone help me find a used carb for a Massey Harris Pony???? Dale Nelson <nelsond29@comcast.net<>>Belle Vernon, PA USA Subject: Need Moldboards for a MH 28 2-14" Plows Looking for 14" moldboards that will fit a MH 28 plow. I have looked at Case, MF, Deere, Oliver and IH Moldboards and nothing matches. Have the older style bottom with the share that has a point. Any help would be greatly appreciated. Tyler Horner <tylerhorner@verizon.net<>>Salisbury, MD USA Subject: MH 44 looking for parts and servioce manuals, also i need to redo the brakes, are replacement or substitute parts available? or can the brakes be relined? mark finegan <finegan_2001@yahoo.com<>>elyria, oh USA Subject: massey harris 20 side panels We are rebuilding a Massey Harris 20 and we need the front side panels. I have tried to order them online but all I can find are panels that fit a 22. Can anyone tell me where to find them? Ken Lindemann <lindemannken@hotmail.com<>>Villa Ridge, MO. USA Subject: MASSEY HARRIS WE GOT THIS TRACTOR AND HAVE A MODEL #PGA5551A ANOTHER #N628-500 CAN U TELL US WHAT YEAR MODEL TRACTOR WE HAVE TRAY WECKAR <WECKTL@HOTMAIL.COM<>>KAMAY, TX USA Subject: Massey harris pacer Trying to find brake linings for a massey harris pacer wedge type any help i'd be gratefull Doug Roberts <ttpilot@yahoo.com<>>truro, ns canada Subject: MH self propelled corn picker I have recently purchased a self propelled corn picker. It is in excellent condition, runs and I did pick about a half a wagon load of corn with it this fall. I'm looking for any information on serial number lists, production numbers estimated value and any other information that would be available. The story behind this picker is I stumbled upon it the day before it was to be cut up for scrap. I purchased it for scrap value, brought it home, cleaned the fuel tank, filed points, put a fresh battery in it, changed the oil and it started right up. I believe it has the original tires, paint is in excellent condition for the age, which I believe it has never been repainted, as the decals look original too. Thanks--Scott DeYoung Scott DeYoung <jdgreen9@netoptw.net<>>Donovan, Il USA Subject: m-h 101 parts catalog looking for a m-h 101 sr. parts catalog to double check a manifold p.n. 812473-1 on a chrysler engine. manifold on the tractor is cracked beyond repair. thanks mike porter <ihcrc450@yahoo.com<>>oakwood, oh USA Subject: dual loader does anyone know where to locate the model number on a dual loader?? Stacy <swells1223@comcast.net<>>loveland, co USA Subject: Re: Massey Harris 20 Tractors This is not your tractor. I still own it. Someday I will come and get it. Greg Ott <gregott2000@yahoo.com<>> USA Subject: Massey Harris 101 Jr. problem I went to change tires on a 1946 Massey Harris 101 jr. I had for years. I noticed that the rear wheel on the same side as the gearshift will not now spin with the tractor on blocks, in neutral. The other side will spin. It has been sitting on blocks for 4 years....just now getting around to it. It wasn't that way when I picked it up over 4 years ago, and it had sat for decades before that. Just wondering if anybody out there would know of something in the unit responsible for disengaging this wheel that I could lube or unstick? Thanks for reading. John Hemphill <emailhemphill@yahoo.com<>>Marysville, CA USA Subject: 1950 massey-harris pony hello ! I dont know much about tractors but love my farm based antiques. At an auction today in Combermere I picked up a 1950 massey-harris pony in perfect condition for $1700 I'd like to know what such a piece usually goes for (good deal?). I'm not planning to sell it, just another piece for my collection. I'd love to hear a little about the tractor. thank you, Ron Ron <motorcycle_junkie@hotmail.com<>>hamilton, on Canada Subject: Clipper Combine 1943 Trying to find info on a combine we had when I was a kid. I do have a parts book that I got on ebay. I still need more. Parts book says it is a "Self Propelled Clipper, 7 foot, serial number 5001 and up. First used in 1943" Grain tank is located directly behind the operator platform. I and a friend would like to restore one. Any ideas? Thanks from Missouri. Dale Dickkut <ddickkut@rpt.coop<>>Rock Port, mo USA Subject: MH GP I was wondering if anyone new of a Massey Harris GP 4WD for sale in any condition. Aaron Newby <Aaron_L_Newby@hotmail.com<>>Lewisport, KY USA Subject: how to attach plow My brother in-law has accquired a Massey Harris Pacer and it came with a double plow. He is having a problem attaching the plow to the tractor and doesn't want to hook it up incorrectly and ruin anything. Can someone guide me through the hook-up procedure... Many thanks, Bruce Bruce Wade <observer_dude@hotmail.com<>>yarmouth, canada Subject: Massey Ferguson MF 1650 Garden Tractor i just recived a Massey Ferguson MF 1650 Garden Tractor and i cant seem to keep it running what i need to know is how is the recharging system hooked up on this tractor thanks for any help you may be able to give tony taylor <mystikal_loki@yahoo.com<>>oneonta, ny USA Subject: 1949 MH 44 look for front steering box for factory wide front row crop. Also need new hyd pump, webster electric company 2h01a-4. also info on power steering kit that is has on it. David Root <davidr@homrichinc.com<>>Carleton, mi USA Subject: where to get sleeves for 33 Havent seen sleeves for MH 33 are they even available?tractor now has M & W pistons. Would love any help thanks 517-605-7474 jfrye@tc3net.com G Frye <jfrye@tc3net.com<>>palmyra, Mi USA Subject: where to get sleeves for 33 Havent seen sleeves for MH 33 are they even available?tractor now has M & W pistons. Would love any help thanks 517-605-7474 jfrye@tc3net.com G Frye <jfrye@tc3net.com<>>palmyra, Mi USA Subject: Re: 44 Massey Harris WE ARE ALSO LOOKING FOR A GOOD SOURCE FOR A FEW PARTS-DO YOU HAPPEN TO KNOW OF ANY. JACKIE <jallen_98@hotmail.com<>>BOONVILLE, MO USA Subject: MH Pacer Sarter Question Not sure if this is the right place to post a question, but I'll give it a shot. I recently acquired my fathers 195? pacer. The starter works but 2 out of the three housing ears that the bolts go through to hold into place are broken and I'm wondering if they sell or make the housing only to fix her up right. It is a auto lite MZ 4146A. Thanks for the time! Joe Pizano <jpizano@verizon.net<>>Exeter, PA USA Subject: What kind is it? Hi i just recently purchased what i believe to be a Massey Harris 44. The data plate is missing so this is a guess. It has the R.C. front tires and a inline 6 cylinder engine. It is a four speed standard transmission with a front and back PTO. I just took some pictures of it which i wanted to download for your educated viewing. The tractor is in decent shape considering it had been neglected for quite some time. The good news is it still runs and we are planning to restore and use around our farm. Any help would be very appreciated.I can download the pictures and send them to you if you would like. Thanks Daryl Ripper <dmrranch@msn.com<>>Los Lunas, N.M. USA Subject: Re: 1954 Massey Harris Pacer I am looking for a hood for a 1954 massey harris pacer zach <nhtroutfisher123@yahoo.com<>>andover , nh USA Subject: MH22 Brake Springs Got a 1948 MH22 with a good strong engine & loader---the brakes are shot----pulled it all apart & I now need the springs (3 each side,6 total) that return the brake discs to home after depressing the brakes---anyone out there been thru this & found a source......Tom Tom Carroll <tcarrollscenery@comcast.net<>>New York, ny USA Subject: MH 22 Got a tractor (MH 22, 1948) with good strong engine & a good loader----brakes are shot----pulled all apart & now need the 6 springs that return the discs to home after applying the brakes---anyone out there been thru this & found a source.....Tom Tom Carroll <tcarrollscenery@comcast.net<>>new york, ny USA Subject: Massey 50 I am looking for the replacement rim (that was rusted out) for a Massey 50. The tire says 12.4-28, 11-28. I am new to owning this and help would be appreciated in understanding how to find just this rim. The inside hub that the rim bolts to looks fine. Can anyone offer suggestions/advice in finding this rim. I live in Saskatchewan, Canada. Thank you in advance for your email, Darren. Darren <shelby1431@yahoo.ca<>>whitewood, sk canada Subject: 2 furrow mounted plow for Massey Harris Pacer I am looking for a 2-furrow mounted plow for my Massey Harris Pacer so I can do garden work. I would also be interested in the 2-disc plow if someone had that to sell instead. Call me 507-254-5189. Thanks! Lee <lkpongratz@localnet.com<>>Northfield, MN USA Subject: Massey Harris 22 rear end noise I have a MH22 and it is making noise in the rearend, mostly in 2 gear, but sometimes in 1st and reverse. It is real quiet in 4th. Any ideas??? Thanks Donnie. Donnie <dtbtjas@midplains.coop<>>Amarillo, TX USA Subject: Looking for Massey Harris 12-20 paint code I am looking for a Massey Harris 12-20 paint code. I have been told that it should be a dark green color and would like to know if this is correct. Also, if anyone knows of a paint code for the correct color it would be very helpful. Al Schmitt <bkrinbl@telusplanet.net<>>Wainwright, AB Canada Subject: 44 Massey Harris I recently found and have in my shop a Massey Harris 44, Serial Number MH 44GR 6870 which equates to a 1949 gas, row crop which matches what the tractor looks to be. I am just starting the search for some parts which are missing or just plain bad. I am looking for sources for new or used Massey parts and contact info. Most of the parts match the parts manual but there are some differences so would like to talk to an "expert" Thanks Reid Priebe Reid Priebe <reidpriebe@aol.com<>>Clark, CO USA Subject: Wanted Massey Harris 22 sheet metal I am looking for a front grill for my 1949 Massey Harris 22 and any other restoration part you might have. Thanks Tony <shepherd81@yahoo.com<>>Delano, Mn USA Subject: Need some info Hi There Husband is a collector of all makes/models however something in our barn has us a little stumped. Massey harris horse drawn field sprayer - horizontal boom - meyers pump / mh tank - seat mounted on barrel which is on a cart with wheels . We have looked in all our literature and have turned up nothing and I have searched the net for quite sometime now. Can anyone help us out as to the age of this thing or perhaps a little history. thanks muchly Loretta Loretta Barbeau <lbarbeau@raymondinsurance.com<>>Verner, ont Canada Subject: Massey-Harris Model 30 I just purchased a Massey-Harris model 30, and need to find a Manual, we are wanting to restore it. Any help on locating info for it would be greatly appreciated. Ed <ctaylor@ilgco.com<>>Kansas City, MO USA Subject: info on mf fe 35 Hi, I have recently purchased a 1957 Massey Ferguson FE 35 petrol tractor and have discovered it is the grey and gold color model. Would like to know the correct paint code, more history about this particular model, how many gray and gold models were made etc. This one has been over painted red and gray, but the gold color is very evident on the engine, gearbox and underneath. Regards, Graham. graham hurrell <kung1@epc.net..au<>>port lincoln, sa australia Subject: info on mf fe 35 Hi, I have recently purchased a 1957 Massey Ferguson FE 35 petrol tractor and have discovered it is the grey and gold color model. Would like to know the correct paint code, more history about this particular model, how many gray and gold models were made etc. This one has been over painted red and gray, but the gold color is very evident on the engine, gearbox and underneath. Regards, Graham. graham hurrell <kung1@epc.net..au<>>port lincoln, sa australia Subject: Wallis 20-30 Hi, enjoyed your website. I have a Wallis 20-30 and would like some more info on it. Does any one know what was the last serial number for the J.I. Case plow produced tractors, and the first serial number for the M-H produced tractors? Is there any detailed serial number lists out there? Also would like to find an original crank handle for the tractor. Thanks for the good website. Kevin <raparks@ptmc.net<>> NC USA Subject: Massey's I have two masseys's. One is a pony and the other is a 22. Not for sure on the years, as both are missing their tags. The 22 needs some sheet metal, and the pony is stuck, but we are getting ready to rebuild her later this year. Rosie Heistand <rheist@ckt.net<>>Columbus, KS USA Subject: 1954 Massey Harris Pacer I have 1954 Massey Harris Pacer. It is in excellent shape. It has been kept in garage since restoration. It come with cultervators, draw bar, pto shaft still has orginal cover. John Oliver <towtruck@gloryroad.net<>>Oxford, nc USA Subject: Need some HELP please !!! Ibought a MH101JR. and can't find a service manual for this tractor , It's a 1943 model I was told ! Please help if you can! Thank You Roger Roger Mason <papabearmason@yahoo.com<>>Lebanon, Mo. USA Subject: massey-Ferguson factory I bought my first tractor 3 days ago,,, a 49 pony,,, so I'm checking out the web sites. The funny thing is I worked at M-F in the 70's. I was an assembler at the combine plant in Brantford,, a welder at MF610, and I worked shake-out at the M-Foundry. If you have any questions about the works I might be able to help. I have some stories you might like Brantford has quite a history with farm equipment,,, by the way also worked around the block at White motors on Mohawk Street. later ,,, Kenny kenny munro <jeb_sr@hotmail.com<>>Espanola, on Canada Subject: Massey Harris GP tractor Wanted complete air cleaner for my Massey Harris GP 4 wheel drive tractor, 1934. Serial number 302356. Can anyone help me locate on please. Thank you Stan Cell # 1-780-288-0680 Stanley Kick <jenkick@persona.ca<>>Calmar, Ab Canada Subject: Looking for an engine Have a 1956 Massey Harris 333 that needs a new engine that is approximately 40hp. Might be interested in a Ferguson with similar hp if 1960 and older. Thanks! Steve Maedke <tileontile@yahoo.com<>>Sturgeon Bay, WI USA Subject: Engine parts for Massey Harris 22 Does anyone know where rings, main and rod bearings can be purchased for a Massey Harris 22? F-140 engine Charles E. McClure <CEMcClure@msn.com<>>Temple, TX USA Subject: Re: abum@mchsi.com Congrats on your project. I have a MH 66E that Im trying to get to run better. I also thought that either the starter switch or starter was weak. I have the owners manual . Also I know a guy in Woodburn Ia that has 7 semi loads of parts for MH ,MF i WISH MY TRACTOR WAS MORE DEPENDABLE thanks, del hanner delhanner <hannerd@hotmail.com<>>corning, ia USA Subject: Re: 1949 Massey-Harris Pony tractor horsepower. I presume this is an old question and maybe you already got your answer; however, the Pony came with 11.08 drawbar horsepower and 12.16 belt horse power. I recently purchased a massey harris Pacer...would like to get a pony also. I'm looking for any literature on the pacer and the pony. Lee Pongratz <leepongratz@community-resourcebank.com<>>Northfield, MN USA Subject: massey harris serial number I have a mh the serial number is 379194 can someone tell what kind it is. I think it's 101 or 102. Thank you Conrad Menard <andreelalonde@hawk.igs.net<>>Alfred, On Canada Subject: 1946 102 jr gs twin power just getting started having a grand time .couldn't bare the pain of seeing part of history sitting in the trees .so inside it went and we got started.hope to be up and showing off spring/07 al thompson <cocococo@telus.net<>>high river, ab canada Subject: abum@mchsi.com Hello,everone just got home with my newest baby.A 1945 massy harris 101 sr.Cant hardly wait to get it running and play with it. It has ben setting luckily in side a building for over 20 some years. I really am glade to find web sites like this one. THANKS to everyone Who make it possible. Now the hunt for parts begins ha. ha. Larry Bumgardner <abum@mchsi.com<>>KNOXVILLE, Ia USA Subject: 1947 cockshutt 30 My father is restoring his first tractor, it is a 1947 cockshutt 30 that he had owned many years ago as a young man, sold it and has taken the oppertunity to repurchase it and restore it. He is looking for the paint numbers and formulas for this project. Lisa Kerner <kerner_ranch@yahoo.com<>>greensboro, SD USA Subject: Massey-Harris 44 Special My students are restoring a 1954 44 Special serial number 44 G1RF 52766 for the FFA Tractor Restoration Contest. (Asume that it is a 44 Special as that is what is on the hood and the serial numbers go with a 1954) It was converted to LP and for the contest we need it back original. The owner cut the hood and lost the gas tank. The serial number plate is rusted and not readable. I need a plate made (since the serial number is on the transmission case stamped I think this will be ok rule-wise). I need a gas tank and a hood. I can not find these. I can find a carb more than likely. Can you be any help? They are really excited and I need to keep them going. Thanks. Ben Alley <Balley@troy.k12.tx.us<>>Texas, TX USA Subject: interestede in mh tractors tim swonger <emti9909@yahoo.com<>>scio, oh USA Subject: Unknown year I was trying to find out how to find the year of our latest project. Myself and two other buddies are resurrecting an MH-50 that we gathered out of a horse pasture. I was wondering if there was a way to find out the year through vin numbers? Adam Boothe <aboothe@students.dacc.edu<>>Ridge Farm, IL USA Subject: Massey Harris 20 Tractors I am now the owner of a Massey Harris #20 tractor/ never went very far my father purchased it new. The tractor has been used but still in great shape; two rebuilds and straight tin. I have to repair the radiator and repaint it; I still use it some. These were only made,I think, in 47' and 48'. I would be interested in hearing from others who have one. This tractor was purchased new from J.O.Stone in Aitch Pa; now under water as part of Raystown Dam. I am interested in #20 parts tractors. Thanks Wayne Ott Wayne Ott <janott@pennswoods.net<>>Orbisonia, Pa USA Subject: Looking for MH 44 Special wide front end Trying to locate a Massey Harris 44 Special wide front end that was sold at auction in North Central Minnesota a few years back. There was also a Massey Harris 33 wide front end on the sale. T L O <cshoe@qwest.net<>> IA USA Subject: Pacer Recently inherited 1955 M-H Pacer and in the process of restoring. It was really a basket case sitting out in the woods for a number of years. I am coming along fairly well. Ser. #PGA52038 Wes Wes Leitch <w4rux@hotmail.com<>>Wadmalaw Island, SC USA Subject: Wallis 20-30 tractor I have to restate my comment from yesterday. The tractor I have is a Case-Wallis Tractor circa 1925. It is being restored and my husband needs to find a sleeve for it. If you can give us information we would appreciate it. Thank you. Lois C. Krekow <lkrekow@midlands.net<>>Marcus, IA USA Subject: Repairs for an old Wallace tractor I have an old Wallace tractor that had belonged to my father. He farmed with it during the early 1900's. It is in need of repairs and we are wondering if there is anyone whom we can contact for parts and advice. Lois C. Krekow <lkrekow@midlands.net<>>Marcus, IA USA Subject: Massey Harris General Purpose NICE SITE!! WE HAVE A 1927? GP. Runs great in parades, etc. Some say it is newer than that. Our local dealer couldn't tell by the seriel #'s. Is there anyone out there that knows??? Seriel # is 30104776. Also would like to hear from someone on approximate value if here has been a recent sale of one. Rosemary&Kurt Paeper <rose@trvnet.net<>>Humboldt, IA. USA Subject: 1936 Pacemaker OPA HI, I have a '36 Pacemaker OPA serial# 200337 which runs like a dream. Have been working on it slowly for 12 years and maybe this summer I can shoot on the green paint. Brown primer is not a good color. Was a real dog when I got it...engine was stuck but tractor was complete. So It still needs new tires...but after the painting is done. Someday I may even be done with it. Tim Timmie W. Clark <clarktw@hotmail.com<>>Auburn, NY USA Subject: Re: Can't identify from this site a 1955 MH-33 You do have a '55 model 33. G is for gas, 1 is for the low altitude carb jetting (under 1000 feet), S is for standard (or wide) front end, and F is for foot clutch. Ian Johnsen <IanJohnsen@aol.com<>>Sedro Woolley, WA USA Subject: Massey Harris Pony I just bought a Pony last year and love the little thing. Mine is a 1949 model with a Massey-Ferguson loader and Massey-Harris belly mower. The loader is a slightly newer MF No.32. This tractor has been kept mostly stock and restoration for it is planned.I don't what model number the mower is. It has LA228 cast into the casting that holds the bar. Sam <farmboy_sam@yahoo.com<>>Bow, Wa USA Subject: Re: pony owner Kevin, I just started restoring a pony but have a load of questions if you have the time. I would appreciate any info you have. TY Lori Lori <red_odie@yahoo.com<>> ME USA Subject: Massey Harris pulper I saw your web page and wondered if you have ever heard of or seen a Massey pulper. It is very old and all red in color. I can't quite recall the lettering color but I believe it is either red or yellow. It belongs to an acquaintance of mine and he thinks that it is a corn sheller. From what I have found on the internet it appears to me that it could be a beet pulper. He thinks that it was manufactured in Canada but I am not sure why he thinks that. I realize that this may not your area of expertise...Just thought that you might have seen one or heard of it over the years. If you have any info I would really appreciate hearing from you. Many thanks, hymbywaters@yahoo.com Very nice web site!! HMBywaters <hmbywaters@yahoo.com<>>Zearing, IA USA Subject: Massey Harris Pony We have recenty bought a MH Pony. We were told it is a 1951 or'52. From all pictures we've seen it looks just like the Model 11. We got a service manual with it. We are restoring it. We need literature to show all parts of the body and exactly where they fit. And where on the tractor can we find the serial numbers? Thank you. Brad & Katrin Kuriger <kuriger8915@msn.com<>>Waterloo, IA USA Subject: Massey Harris 444 Looking for the mainshaft in the transmission, one from a 333 will work please help... Scott Stewart <sstewpg@yahoo.com<>>Volant, PA USA Subject: Re: Can't identify from this site a 1955 MH-33 I also just bought a 1953 33 massey model#33G1RF,SERIAL # for the 1955 model year stsrted at 9782 Ray Mitchler <mitchler@telus.net<>>langley bc, BC canada Subject: Massey Harris Senior 101 I am, ( should say, )My husband, has a tractor that is old and he`s trying to restore it so he can use it. But he needs parts and some help. Can someone help him? Gail Ericksen <gailerickson@sbcglobal.net<>>Racine, Wi USA Subject: Massey Harris Model 81 Hello, I recently inherited a 1945 Model 81 Massey Harris with a Continental F124 engine in it.Over the years the distributor has been misplaced and I am hoping someone might tell me where to find a replacement. Thanks, Bill Hewitt Bill Hewitt <radioguy@rushcomm.ca<>>D'Escousse, NS Canada Subject: Massey Harris photos My Dad owned a Massey Harris dealership in Northeast Kansas for a number of years during the 50's and 60's. I am looking for photos of tractors and combines during this time period. He is now 88 and loves to think about those times. He has some pictures in his workwhop but I would like to add to them as a Christmas gift. Is there anyone who can point me to a source or who has some I could download and print off? This is a great website. Thanks for keeping the memories alive. Bonnie Bonnie Hanni <bhanni01@comcast.net<>>Ft., CO USA Subject: Massey Harris Dealer My Grandfather started a MH dealership in 1934. He was also an auctoneer. He would trade allmost anything for a MH tractor. He often traded horses that he would sell from his aucton barn which was attached to the back of the original dealership. My Father Kenney Miller from Wakarusa IN. built a new shop on SR 19 in 1967. I was working with him at that time and I got to help move the old business to the new facilities. With the exception of two years in the Army I stayed with him until MF drove us out of the business in 1985. I read with interest the history of MH. When I started with Dad and Grandpa the merger had not taken place. I will always have a soft place in my heart for Massey Harris. Thanks for the memories and the great photos. Kenn Miller, miller.22@nd.edu Kenn Miller <miller.22@nd.edu<>>Nappanee, IN USA Subject: Re: MH 22 paint code s I am repainting my 1953 MH 22 and am seeking the paint code numbers for the red and yellow paints. Is the Massey Ferguson color the same as the original Massey Harris- to me they look a little different. Thanks. Bill Breitzman <kbletter@nconnect.net<>>Campbellsport, WI USA Subject: Wallis Model K parts needed Excellent web site!!! I am restoring a Model K and could use the following parts: 1) air cleaner assembly, 2) good rear wheels - mine are broken and welded, 3)lugs or angle grousers (preferred) - mine has neither, 4)the correct old Bosch magneto or a mounting bracket for the KW magneto, and 5) the oil sump at the bottom of the frame for a friends Model OK. Any help would be appreciated. Thank you. Kevin Albrecht Kevin Albrecht <kalbrecht@svtv.com<>>Marion, SD USA Subject: Wallis Model K parts needed Excellent web site!!! I am restoring a Model K and could use the following parts: 1) air cleaner assembly, 2) good rear wheels - mine are broken and welded, 3)lugs or angle grousers (preferred) - mine has neither, 4)the correct old Bosch magneto or a mounting bracket for the KW magneto, and 5) the oil sump at the bottom of the frame for a friends Model OK. Any help would be appreciated. Thank you. Kevin Albrecht Kevin Albrecht <kalbrecht@svtv.com<>>Marion, SD USA Subject: Massey Harris 44 Questions Hello, I am hoping someone can help me out or point me in the right direction. I am looking at a Massey Harris 44 Special? and it has a very faded Special decal on the sheet metal. Actually the paint and decals are all so faded they almost don't exist. I believe the tractor is a 1952 and therefore couldn't be a 44 Special. Is there any way, by looking at the engine, etc., to determine if it's a 44 or 44 Special? It has live power and also down pressure on the 3 point hitch. Was down pressure something that came on the 44 or 44 Special? I know very little about Massey Harris tractors and would sure appreciate any information or advice, or where I might find out more about the 44 and 44 Special models. Thanks Bob Bob Harrison <rmh1@semo.net<>>Piedmont, MO USA Subject: Can't identify from this site a 1955 MH-33 Hello, I can't seem to identify my tractor as being a 1955 MH-33 with the information provided in this site. The SN is 11614 and the model is a 33G1RF or 33GIRF. Can someone let me know which model this is G1 or GI and is this is '55 MH or is it even a 33? Thanks, Ashley Holgate Portsmouth, NH Ashley Holgate <requestinfo@comcast.net<>>Portsmouth, NH USA Subject: Help finding engine kit for 1955 MH Model 33 33G1RF SN/11614 Hello all, This site seems really great so far and I'm hoping that someone can help me out in this restore job. My motor smokes (It's bad for the health you know!) and it's in need of a rebuild but I am having a really hard time finding things for this. I love the tractor and love it's originality and want to make it as whole as possible. Any help you can give me would be great. Thanks for your time! Ashley Holgate Portsmouth, NH Ashley Holgate <requestinfo@comcast.net<>>Portsmouth, NH USA Subject: WANT A MASSEY THAT RUN ON PROPANE I'm looking for a massey harris that run on propane. i live in alberta, canada, and i'm looking to add one of those to my collection. please send me an e-mail if you have any info regarding this add. thanks for your time veronique bergeron e-mail: veronickb@hotmail.com veronique bergeron <veronickb@hotmail.com<>>fort mcmurray, ab canada Subject: What Year ?? I have MH-50 with power steering and front end loader My Ser. number is JGF 514330 Not sure what year it is can anyone help. Thanks JIM PS Love your site James T Ganley <jimmh50@yahoo.com<>>Fremont, NH USA Subject: for sale Massey Harris 92 combine hill side combine rare find? some rust. needs work. in cen. wa gerg <phh@elltel.net<>>thorp, wa USA Subject: 1938 MH101 tractor Do you know of an early 101 tractor in Florida. I'm looking for details, measurements, photos etc. to aid in building a half scale reproduction of the 1938 model 101 like I started farming with in Indiana. Thanks, Clint Russell Clint Russell <hafftrac@wmconnect.com<>>Apopka, FL USA Subject: 1938 MH101 tractor Do you know of an early 101 tractor in Florida. I'm looking for details, measurements, photos etc. to aid in building a half scale reproduction of the 1938 model 101 like I started farming with in Indiana. Thanks, Clint Russell Clint Russell <hafftrac@wmconnect.com<>>Apopka, FL USA Subject: mid-western industries loader model 102 H I have a loader that I was told would fit a 4000 ford, but the loader was to narrow. I found a posting that said it might fit a MFH 202. anyone with any info or interested in buying email me. mike mills <mrpsmike@sti.net<>>Mariposa, Ca USA Subject: mid-western industries loader model 102 H I have a loader that I was told would fit a 4000 ford, but the loader was to narrow. I found a posting that said it might fit a MFH 202. anyone with any info or interested in buying email me. mike mills <mrpsmike@sti.net<>>Mariposa, Ca USA Subject: 44 MH Currently have a 1951 44 RC Massey Larry Good <lgood1950@hotmail.com<>>Neligh , NE USA Subject: trying to find part for my massey ferguson looking for manifold for a z134 gas continental engine serial number on tractor beside stering is 9a13124 have no idea which model no is this tractor just know that it yellow in color have a 200 loader on it no pto problably a industrial d'ont know the year have rebuild engine but manifold is crack bably dealer of massey ferguson here could not found this part for me couls you help terrify job on your wed site very educative from Rejean Pelletier Timmins ontario canada Rejean Pelletier <regpelle@ntl.sympatico.ca<>>Timmins, on canada Subject: I have a 1938 101 Twin Power I redid in 1995 and it was in Antique Power. I am working on a 1953 44 Diesel with the high arch front. Ed Marstellar <jmarst@alltel.net<>>Fredonia, PA USA Subject: Model 25 hi there im working on a model 25 its the oldest massey i own and i need to be put in the right direction for some parts i need the cast steering wheel and the shaft its on and a belt pulley thats what i need for my old 25 i also have a newer model 25 styled ser#85615 my guestion is how many were built styled and my one book sayes they were built to 1946 and my other book sayes 1938 and my book sayes fewer than a thousand were built heres hopeing you can help thanks Lee Werth Lee Werth <lwerth@wolfnet.net<>>Symco, WI USA Subject: pony owner Great job of the site.Love to come in and browse around and read the comments. I just finished restoring 52 pony and would love to hear from other pony owners.....kevin kevin currie <kevincurrie@pei.sympatico.ca<>>cornwall, pei canada Subject: Your site is very informative and interesting.My next door neihbour and I collect antique tractors and are always looking for information on our tractors.Today I was trying to find the proper paint colors for Massey Harris and found it on your site. Thank You! Rejean Beaudry <www.rejfran@sympatico.ca<>>Verner, Ont Canada Subject: Massy Harris Pacemaker Sirs, As a young boy I spent 100's of hours on "Pacmaker". I have been serching for some photographs of the tractor. I've searched the Web, to no avail... Could you please direct me as to where I might find a phot or two..??? Thank you... Dario Brisighella Sr. <cadillac2@wi.rr.com<>>Oak Creek, Wi USA Subject: WANTED: Wallis Tractor Looking to restore a Wallis for my Grandpa. Will take any model, any condition considered. 605-427-0404 or dmwallis@iw.net Thanks - Doug Wallis <dmwallis@iw.net<>>Madison, SD USA Subject: Massey Harris Mustang I have spent many years plowing and harrowing on my dads farm with a Massey Harris Mustang. My dad bought it in 1981 and we pulled many cords of fire wood out with it. When my dad bought it the tractor still had 3 of the OEM tires on it. I wish we still had the farm. I miss that old Massey Forist Mclain <f_mclain@yahoo.com<>>North Adams , Ma USA Subject: Massey Harris 555 Diesel tractor just purchased a 555 ata sale, very quiet running diesel, like the chev duramax engine, really impressed. have used many gas numbers but never a diesel, what are the ins & outs on this machine,currently doing the usual with it,like fluid changes along with filters, anyone know what filters would be good for it like filter numbers for the fuel& lube oil systems, am looking for a shop & owners manual at this time. Bill Shaver. william j.shaver <mrcanoehead@canoemail.com<>>FT.Plain , NY USA Subject: Massey 22 I liked your site very much in procise of rebuilding a 22 looking for a complete pto unit. Thank You Roger Roger Paradis <rogerparadis5@sympatico.ca<>>Massey, on Canada Subject: Hello, I liked you site very much. But maybe you should change the color of the background on the site? Peter <forsmann_pete@hotmail.com<>>New York , NY united states Subject: Re: massey-harris model 81 or 101? looking here at my manual, the model 81rc &std were only made with the continental f124. the 101jr.rc depending on the year were made with the f124,f140, or the f162. hope this helps. scott scott heggie <scottheggie_5@sympatico.ca<>>lachute, qc canada Subject: Massey-Harris 22 I just acquired a 1949 Massey-Harris 22 and cultivator (including the operator's manuals) that appears to be in very good working order except for the brakes. Is there a way for me to find out an approximate value of this tractor? Jan Boyd <boyd305@bellsouth.net<>>Ocean Springs, MS USA Subject: Massey-Harris 22 Lookiing for a massey-harris -22 row crop rear axle 2x40" with brakes on axle. Will pay all shipping or will come and pickup if needed. thanks charlie Veneros <cnv@nmo.net<>>chebo, mi USA Subject: 102Jr.std Hello I was checking out serial numbers. I am a farily new massey collector with 7 tractors to date. I have what I believe is a 1940 102jr.std witha 140 con't . did these use the same or included with the numbers of the 102jr.rc One of the best web sights I have seen for Massey Harris Well done.......... Mark Lambert <malambert@sympatico.ca<>>Port Colborne, Ontario,Canada Canada Subject: R. O. Hendrickson I am a grandson of R.O. Hendrickson who I did not know much about till now. Thank you. Jeff B. Hendrickson Jeff B Hendrickson <mariner322000@yahoo.com<>>Cable, WI. USA Subject: 201 massey Sorry i was wrong about what my dad had for sale it is a 1940 201 massey if anybody can tell me where to find out about prices could you let me know Roger <newt_roger@hotmail.com<>>Saskatoon, SK Canada Subject: First Tractor I'm a first ime owner of a Wallis Serial #66268 The tag on it shows 20-40HP Is this a Certified 20-30 as the web page lists? What is the value if this unit restored? Appears that it is complete . Feedback would be great. rgreenle@wyoming.com Bob Greenley <rgreenle@wyoming.com<>>Mills, Wy USA Subject: 202 Massey My dad has a 202 for sale & someone wants to trade him a cockshutt 50 for it can anyone tell me if this is a goo trade and possibly what either are worth or where i could go to find some prices? Or if you are intersted you can email me at newt_roger@hotmail.com Roger <newt_roger@hotmail.com<>>Saskatoon, sk Canada Subject: MH You have a very nice and helpful website. I own 2 MH tractors (1953 33 and a 1948 20) and am in the process of getting a 44 diesel. Dads got 9 MH tractors, a 20 std,22,30,44,44,44SD,444,2 1938 Challengers. Them MH diesels are very nice. If anyone has a 33 diesel that they want to sell, let me know. Thanks alot Logan <lhoefler@emailaccount.com<>>New Vienna, IA USA Subject: massey harris collection for sale would like to sell tractors and parts as a whole to one person club or museum. all tractors are unrestored. will respond to serious inqueries for more information. jeff weaver <jeff51weaver@earthlikk.net<>>tionesta, pa. USA Subject: 1949 Massey-Harris Pony tractor horsepower. What is the horsepower of a 1949 Massey-Harris Pony tractor. The club that I belong to in Dundas, Minnesota called the Rice County Steam & Gas Engines, INC. has a 1949 Massey-Harris Pony tractor from Toronto, Canada as our feature tractor for our 31st ANNUAL fall show on September 3rd and 4th. Please e-mail me immediately today. Melissa Bauer <m_bauer18@hotmail.com<>>Faribault, MN USA Subject: massey-harris model 81 or 101? I recently purchased a massey-harris tractor and i need help determining the model, the serial# is 403356.from the serial # list it could be a 1943 101jr rc or a 1944 81 rc . The engine #plate is missing,but the cylinder head casting # includes f162 james ritter <oomaw@aol.com<>>fairfield, pa USA Subject: 1/8 scale model Massey Harris Model 44 I recently pruchased a 1/8 scale model MH Model 44 at an estate auction. On the inside of the left fender it is embossed with "Dealership Meeting, Kansas City, July 1997. Hope someone can help me with, what dealership meeting this was and why a scale model tractor was made especially for it. The tractor is signed by Joseph Ertl. It is a large model and weighs about 15 pounds. Any information would surely be appreciated. Thanks. Larry Beck <ruadearry2@peoplepc.com<>>LaCrosse, WI USA Subject: Massey -Harris I-244 tractor I purchased an I-244 at auction. I know little or nothing about Massey-Harris. The tractor is painted yellow, has full heated cab, road grader rear tires, and a 6 cyl continental engine with magneto. It also has hydraulics. Tractor ran good when I got it, but then I couldn't start it, so I have the mag out being checked. Does any Massey- Harris collector know anything about this model? Thanks Barney Sherwin <TractorguyNH@verizon.net<>>Walpole, NH USA Subject: Guestbook+. Added features to this guestbook We have added a couple of features to this guestbook that you see on this entry. The REPLY button and subject line. Rather than use a complicated BBS system, this gives an option to reply to an entry and make it visible to everyone. You are welcome to respond with useful information to entries made here. Entries are still subject to approval to keep in the guestbook+. Richard Duncan <rvideo@earthlink.net> < wd5b.net> USA I love your site, and I love massey harrises, Ive spotted a 44 special,that i want to buy, It has a bent in grille,but all else is fine,I think, Kirk C, kirkC, <kirkchev@ruraltel.net<>> Alton, Ks USA - Monday, January 17, 2005 at 15:33:54 (PST) Hello from dowwn under.I was just brousing through your site so I though I might ask you a question.Or two.I finally got to see a distant friends collecton Kevin McKinty of Lockhart N.S.W. Australia some time back.Spotting this green massey from behind I rushed around the front only to find to my amazement it was a Wallis tractor.A close friend to Kevin and Myself,Norm Jonson from Longford Victoria Australia was visiting Kevin as well.Norm and I talked about this {GREEN WALLIS}to a small degree. Norm told me Wallis tractor were painted green just before they became the Model-25.So I came home and checked over some of my beautiful JUNK. I have Wallis No 57352 It apears to be just a grey tractor with no signs of any other colour but RUST.It does have an alluminum tag on the front of the boiler frame under the radiator that reads massey harris 57352.NO number is visable on the boiler frame under the carby.It has a tag on the bonnet corner above the magneto reading MASSEY HARRIS Co-Ltd,MASSEY-WALLIS Engine Gargoyle mobil oil "BB" Transmission Gargoyle mobil oil "C" It was missing the radiator.I have found a radiator with wallis on the top tank.It has wallis in raised letters on the side of the engine block.I was guessing this was a wallis 20/30 just before the Massey 25.Because the radiator was missing i am not sure if it could of had Massey Harris on the top tank,this was a grey tractor. My next wallis I purchased about 40 miles away from Kevins place a small town called Oaklands.Checking this tractor over when I arived home I found what was left of green paint over the top of grey.This tractor has wallis on the engine on the engine block and radiator top.Bonnet is missing.The tag at the front of the boiler frame under the radiator is missing.There is a number on the boiler frame under the carby 879.These numbers are stamped in,look original.Did all wallis 20/30 have tags at the front of the boiler frame,if not and only the last 20/30 models had Massey Harris tags,why does this one have a low serial no 879?.Wheels are hard to try and track history because of government policies at the time of there entry into Australia [long time ago] lots of tractors entered Australia without wheels.Companys like Goodyear and Dunlop were contracted to fit wheels to these tractors as well as make wheels and adapters to convert steel wheels to rubber tyers.I have one more wallis to bring home,but i dont know much about this one.I also have Massey Harris 745 row crop [British]with a 4 cyl perkins.Serial no L8637TY.I have a standard 745 tractor its serial no is K3941T.Do you know what the TY or T stands for.I have a 744 row crop with a P6 perkins in it,that one still needs to come home as well.Some of my other masseys are green 25 no-70834,water pump in front of magneto,green 25 no-72855,water pump behind fan.Red 25-73452,Red pacemaker no-120538,44-ks-3135,44-ks1291, 203-99868, 81 row crop no-435080.I have 2 more 203,s 2x55K ,1 wallis 20/30, 1 green pacemaker and a 744-P6 perkins,row crop-wide front still to be brought home.I am not sure if somebody can solve my green/grey wallis problem.It might have been an agent or dealer choice.who knows i would just like to get right. Patrick Morris <rusty_ville@dodo.com.au<>> West Wyalong, N.S.W Australia - Friday, January 07, 2005 at 23:04:43 (PST) Hi - I have enjoyed looking at your website. I would like to have a picture of a 202 and a 203 Massey Harris tractor. My Dad used to farm with them. Do you have one on your website? Thank You. Raymond <r.pwelsh@sasktel.net<>> Quill Lake, Sask. Canada - Wednesday, January 05, 2005 at 14:50:11 (PST) Your Tractors Are Amasing. I Just Got Done Restoring A Massey 33. I did this as a 4-H And FFA Project. Do YOu Know If Anyone Is Selling A Massey 44 In New England? Padraic <farmall54@lycos.com<>> Madison, Ct USA - Thursday, December 23, 2004 at 04:51:10 (PST) I am in the process of rebuilding a 1951 44GR. Am in need of a grille, when is a good place to pick up new or used parts??? Larry Good <lgood1950@hotmail.com<>> Neligh, Ne USA - Wednesday, December 08, 2004 at 16:25:39 (PST) i have a 1954 massey 44 with no serial number plate and a 260 gas engine i am looking for a radiator and gas cap tom guenette <tomjudyguenette@hotmail.com> oak creek, wi USA - Tuesday, November 09, 2004 at 16:57:42 (PST) Have recently purchased a 48 Massey Harris 55 GS, we also have a 49 Massey Harris Pony. The Pony belonged to Cal's Dad back in 1961. Tractor was sold in 1963 and in 2002 Cal was able to locate it and return home to the family homestead. Both need restoring but both are running and original. Thank you very much for taking the time to have this web page available to one and all. Cal and Mary McMillan Dutton, Ontario, Canada. Calvin McMillan <cal_marymcmillan@hotmail.com> Dutton, On Canada - Thursday, November 04, 2004 at 15:49:00 (PST) I recently bought a Johnston Harvester 82 from 1946. As far as I can undeerstand it is a Massey Harris 82. The serial number is 435775, which is a number for a MH 82 from 1946. Why is it called JH? I´ve only seen it in Sweden and Norway. On your site it says it schould like the 81 have a Continental with 124 cu.in, but I´ve read the 82 schould have a Continental with 160 cu.in. Which is right? Thanks for a nice site. Bjorn Bjorn Jonsson <bjorn.g.jonsson@teliasonera.com> Uppsala, Sweden - Monday, November 01, 2004 at 04:03:59 (PST) I have a Massey Harris 101JR Twin Power. Where can I get replacement decals? I would also appreciate any input where to locate or how to duplicate the side battery panel which is missing. This is a fantastic website! Thank you. Lynn <tractorfarmpa@yahoo.com> USA - Wednesday, October 27, 2004 at 10:02:17 (PDT) I have just unloaded a 52 pony.I am going to restore it to origial condition. Looking for some things to go on it ( plow, mower, ect. ).Is serial number stamped on tractor somewhere tag is gone??? ENJOYED YOUR SITE . Kevin Currie <kevincurrie@pei.sympatico.ca> CORNWALL, P.E.I. CANADA - Sunday, October 17, 2004 at 02:44:42 (PDT) I just brought home my first tractor. MH22. Runs good. Needs some good paint and a few sheet metal panels. Where can I find things like muffler, headlight assys, oil filter and other service related parts? thanks in advance. Steve Steve Clevenger <sdclevenger@aol.com> Snellville, GA USA - Saturday, October 16, 2004 at 19:34:30 (PDT) I have a Massey Harris model 81,I think? Serial number 20GR4443. Is this a model 81 or a 20? It has a pto driven lift under the seat.Any help greatly appreciated. lee <ltaw3@juno.com> morning view, ky USA - Monday, September 27, 2004 at 17:22:41 (PDT) Hello..anyone have any information on finding implements for a MH 101 Jr. or switching to a 3 pt. hitch? Thanks. This is a GREAT page for us new to the antique tractor hobby. Thank you!!! Pete <crossfire84vette@yahoo.com> West Branch, MI USA - Thursday, August 26, 2004 at 07:22:44 (PDT) Restoring 1942 M/H 101 super and need parts! John Crossen <jcrossen@lhup.edu> Avis, PA USA - Tuesday, July 20, 2004 at 19:51:09 (PDT) I recently was given a MASSEY HARRIS tractor and its old how old i dont know but it works well my friend used it for quite some time and he's 78 and he got it from his father well anyway I want to use it on my ranch and I need to ID it so I can buy parts for it And this is where I could use your advice where can I find the modle and engine type all I know is that it has a 6 cly flat head engine can you help well I want to DUARTE <cascabel1@ev1.net> san antonio, TX USA - Saturday, July 10, 2004 at 17:43:05 (PDT) My brother has come across a 1940 Massey Harris Challenger and he needs to know where he can find parts to restore this work of art. Avery Turbyfill <cfdl26c@aol.com> Kings Mtn., NC USA - Wednesday, July 07, 2004 at 08:14:50 (PDT) Looking for information on 1944 81S Massey Harris, Please Help!! Adam McDonald <windecho@nb.sympatico.ca> Canada - Monday, July 05, 2004 at 17:37:00 (PDT) We are looking for rear wheels and rims to fit a 1948 Massey Harris tractor. We are just beginning to look and need links, phone numbers ect. thank you Missy Missy <tpeters@heartland.net> Red Oak, Ia USA - Friday, June 18, 2004 at 05:52:32 (PDT) I have a 1939 Super 101 and can't find exactly where all the decals go? HELP please. This is a great site. Thank you. Mike Zaugg <joe@phonewave.net> Fallon, NV. USA - Sunday, June 13, 2004 at 17:33:18 (PDT) Home of the Walter A. Woods machinery company. Ken Burns <kburns792@hotmail.com> Hoosick Falls, NY USA - Tuesday, June 08, 2004 at 05:11:44 (PDT) I have just trader for two old Masseys one 44Special and one44 the 44 is pretty much parts but the six cyl.44S did run the fellow that had it started it off a 12V battey Iwant to use 6V as that is what the charging system is the battery cables are gone and I need to know if it is pos.or neg. ground any help would be great .Thanks I Love your site. Mike Huffman <cncmill@train.missouri.org> Summersville, Mo USA - Friday, June 04, 2004 at 12:30:50 (PDT) i have a massey harris tractor not sure of the model no. it is a 1948 rc 4 speed trans continental 4cyl engine it has a autolite distributor i need a cap and rotor button the rotor button fits a small shaft every button i have found is for a big shaft have looked every where napa carquest massey dealers please help thanks glen fowler <gafowler@chesnet.net> spartanburg, sc USA - Friday, May 14, 2004 at 18:15:12 (PDT) I have a Massey Harris Pacemaker 1936. This tractor was my grandfather's and we are in the process of restoring. We are short of the writing located on the kerosene tank. WE notice writing on the tank of the tractor located on your web page. If you are able to help it would be much appreciated. Anthony Bygrave <normanddeb@bigpond.com> Yarraman, Qld Australia - Friday, May 07, 2004 at 15:06:36 (PDT) i am looking for a float control valve for a 1957 m-h 444. i have looked EVERYWHERE and i am beginning to think i'll never find one. can you please help me! chelle flud <chelle_flud@yahoo.com> kiowa, ok USA - Thursday, May 06, 2004 at 20:52:52 (PDT) I have a Massey-Harris with the numbers 33GIRF 11246 marked on it. Does that mean it is a 33 model? I would like any help you could give me on finding out the year. Joe Walker <maniakstudio@aol.com> Woodhaven, MI USA - Wednesday, May 05, 2004 at 15:19:53 (PDT) I am looking for a set of valve springs for a 1953 Massey Harris "Pacer".There are two sizes, I need the longer size. Can you help me out. Leigh Waldron <lswald@nb.sympatico.ca> St. Stephen, N.B. Canada - Wednesday, April 21, 2004 at 18:17:44 (PDT) I have a 44 Massey Diesel. I'm not to sure of the year. Someone told me that they had a weak starter. Is this true. And what were all their strong and weak points? Andy <truckin_moose@yahoo.ca> Prince Albert, Sk Canada - Thursday, April 15, 2004 at 12:16:02 (PDT) Dick, I have a 1946 Massey Harris 81-R that I am restoring. I am having a difficult time locating a distributor cap and rotor. The distributor s/n is IGZ 4005 B-1. Any idea where I might find the above items. Thanks, Ron Adams <ronadams@montrose.net> Montrose, CO USA - Thursday, April 01, 2004 at 15:05:41 (PST) hi im looking for a relative who worked at massey harris/ferguson from 1945 till 1980 at the toronto ontario office his name is william ferguson and he was a foreman in the assembly plant.did anyone know him? please email if you have any info thx paulette ros <pauletteros@hotmail.com> vancouver, bc canada - Thursday, March 25, 2004 at 22:09:42 (PST) My grandfather was Oliver Pliny Conger, who died in 1926 before I was born. If you send me your email address, I would be happy to share some information that I have including a booklet that he wrote concerning mechanization of agriculture and a detailed Brief concerning the company filed on his behalf in a law suit against his former partners. Also, perhaps you might include some better pictures of your 1914 and 1916 Wallace Tractors. Oliver C. Conger, Jr. <csocconger@msn.com> Palm Beach, FL USA - Saturday, February 21, 2004 at 23:42:09 (PST) Looking for rims for front,Massey Harris 22's.Also Massey Harris 22 tractors to buy.And for parts.Thanks. Ron Cabak <rckcjc@centurytel.net> Hawkins, Wi USA - Friday, February 13, 2004 at 02:25:16 (PST) Dick I talked to you at the flywheelers swap meet2003 you were driving a fine 33 gas standard with choke problems. I hope my 33 diesel row crop twin & my wife's 1956 pacer turn out just as nice. We enjoyed your web site , and the profiles on Classic Tractors on R.F.D.T.V love the 44 vineyard . Hope to see you in Fla. last of Feb Thank You Jay & Jennifer Holt Jay Holt <JS HAPPYHOLLOW@aol.com> Selma, N.C. USA - Wednesday, January 21, 2004 at 17:55:18 (PST) Just like to say thanks for all the information you have emailed me ,the clutch went in my 1952 massey ,called the local dealer and not available thru them, so I took the clutch up to the local auto recycler and found one to fit it out of a BMW and install it in tractor and it works good no problems. thnaks again GARY LOUGHEAD <brookside@novaent.ns.ca> TRURO, NS CANADA - Tuesday, January 20, 2004 at 08:15:39 (PST) Many thanks, to all of you, for signing in on the guestlog. This is what makes it all worth-while. My daughter, Cody, and her husband should get all the credit. I am not very good at this, but will try to help when I can. .... Dick dick carroll <dick@strato.net> alta vista, ks USA - Tuesday, January 06, 2004 at 17:30:11 (PST) I very much enjoyed this excellent site.What a nice collection of lovely restored tractors.I have eleven Massey-Harris tractors of my own,from 1948 to 1957.they are all wheatland style & all pretty nice. Robert Robert mathers <r.mathers@sasktel.net> Raymore, Sask. Canada - Tuesday, January 06, 2004 at 13:33:20 (PST) Very interesting site. I have lots of Massey units in current use on my farm. Most restorers would like to live three miles away from an active dealer! That is the reason I continue to farm with Massey machinery. Carl Palmquist <Eastviewfarm@aol.com> Lawton, Ia USA - Saturday, January 03, 2004 at 16:10:26 (PST) we own a 1949 massey 44 pulling tractor, 1949 standard 44 and a 1956 333 with DUAL Loader (this is my daughters e-mail address) dale nutt <horsesrulecowsdrool@hotmail.com> curtis, ne USA - Tuesday, December 30, 2003 at 18:46:58 (PST) My Dad bought a used 102 junior in 1953, we used it on a mixed farm until he retired.I still own it and was wondering if anyone would know the year it was made. the s/n is JS385042. This site is very interesting and informative. Thanks Merry Christmas, Duane Duane Tuttle <chester@psphalifax.ns.ca> Halifax, N.S. Canada - Thursday, December 11, 2003 at 18:05:16 (PST) I have a 1953 massey harris 33, want to restore it. where can i get engine parts and 3 point parts for it. also wondering what engine it has in it for sure. model number 33G1RF serial number 11773 can you verify engine and year for me? thanks really enjoy browseing your site. Jerry Lauer <jl_handyman@hotmail.com> Smithfield, ne USA - Thursday, December 11, 2003 at 05:29:10 (PST) i recently purchased a 1948 massey harris tractor in excelent shape it has a 4 clyinder continatal engine but how can i tell if its a true 1948 i have 6 digit # on the trans but no mh in front of the # please help joe joe laurenson <crusher_83@hotmail.com> thunder bay , ont canadaUSA - Wednesday, December 10, 2003 at 17:23:16 (PST) JUST BOUGHT A MASSEY HARRIS TRACTOR AND WAS JUST WONDERING IF I READ YOUR SERIAL # PAGE RIGHT? THE SERIAL NUMBER ON THE TRACTOR IS 22GS7642 DOES THIS MEAN IT IS A 1952 WITH A CHRYSLER ENGINE IN IT. THIS IS MY FIRST TRACTOR AND I WOULD LIKE TO RESTORE IS AS BEST THAT I CAN .YOUR WEB SITE IS ONE OF THE BETTER ONES THAT I HAVE FOUND THANKS FOR THE INFORMATION. I AM ALSO TRYING TO FIND A PICTURE OF IT WHEN IT WAS NEW TOO. THANKS AGAIN GARY LOUGHEAD <brookside@novaent.ns.ca> TRURO, NS CANADA - Wednesday, December 10, 2003 at 13:15:04 (PST) Recently restored a 33 Massey-Harris tractor. Planning to attend tractor shows. Interested in purchasing t-shirts deplicting Massey-Harris tractor. Is anyone aware of any available outlets to purchase these t-shirts or any other such merchadise? Great web site Thanks Liz Kremer <ben26@effingham.net> Teutopolis, IL USA - Monday, December 08, 2003 at 18:55:36 (PST) I have enjoyed your site. Igrew up using a 1941 MH 101 Sr. Keep up the good work. Thank you Dave David M. Guy <daguyz@cannet.com> Canton, Ohio USA - Monday, November 17, 2003 at 03:56:41 (PST) Enjoyed my visit. I liked the pictures. My tractor is a Massey Harris Mustang, 23 I believe they called it. It is in all original condition. I acquired it inside a barn in 1968 and with few exception it has remained in some barn or other. The original decal is still visible. I did not see a Mustang in your picture gallery so let me know if you'd like one and I'll try to find a nice one for you. John Fila <johnfila@optonline.net> Wingdale, NY USA - Sunday, November 02, 2003 at 11:50:25 (PST) verry nice site. have a 44 with # H260A319M no. on eng. 763399-M2. what do i have. think you have same tractor, right? john mc cann <john_837@msn.com> cherry tree , pa USA - Thursday, October 16, 2003 at 13:19:11 (PDT) You have a nice site with tons of great material. Can you tell me about a MasseyHarris 404 or 406? When were they made.Is this an early industrial MH type'work bull'or is it really a MF.Presently I own a Massey Mustang with a high arch wide adjustable front end.Was this type of front end common on a MH 30? Thankyou Dick.Please email ASAP. Les.Ferris <ferris_les@hotmail.com> Norwich, ON Canada - Friday, October 10, 2003 at 16:01:58 (PDT) i own a massey 44 gas and a massey harris sickle mower (model unknown, trying to find out) i am also 17 dan <masseyharris442001@yahoo.com> clifton, il USA - Wednesday, October 08, 2003 at 07:23:22 (PDT) Enjoyed your site..need help for a stuck clutch..can't seem to get anyone to help me.. thanks again.. Bailey <greenakr@lani.net> Live Oak, Fl USA - Saturday, October 04, 2003 at 05:53:30 (PDT) love your website, one of the best i've seen. love seeing all those old massey harris tractors they look great. am also looking for side panels for massey harris pony. roy pack <pack@classicnet.net> lake city, ar USA - Monday, September 22, 2003 at 19:28:43 (PDT) enjoy your website very much roy pack <pack@classicnet.net> lake city, ar USA - Monday, September 22, 2003 at 19:24:51 (PDT) Hi, I am selling three wallis tractors. I do not know their value, so I am putting them up on ebay. Anyone interested can check them out at the following web address (ebay): http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=2556552936 thanks! b <b@b.jj> USA - Friday, September 05, 2003 at 17:03:16 (PDT) Just purchased a 1951 Pony. Runs great. Looks OK, but needs new paint job and decals -- have never done this before, but I'll learn! I have plow, cultivators, etc., which I will probably sell since I want the tractor for pure fun -- driving in parades and showing it at fairs. Sharon Vinci <blackpearl51@juno.com> IL USA - Wednesday, August 27, 2003 at 07:49:45 (PDT) I am 17 years old, I have my own Massey Harris 444 std diesel. My family has had Massey Harris tractors in the past.This is a very nice website. Thanks a lot, Tim Tim Schacht <bigblackben@earthlink.net> Medina, Ohio USA - Monday, August 25, 2003 at 11:09:08 (PDT) Thanks for letting me view your tractor collection. All though I onwn 20 Masseys myself from a 1938 101R to a 1957 555 diesel none look as nice as yours. Al Cascaddan <alleyyooper> Michigan USA - Monday, March 10, 2003 at 13:20:29 (PST) My Dad ownes a 44 massey and still uses it every day. At one time he had a 101 junior. sean wagner <sandra. wagner @ sympatico.ca> angus, on Can - Thursday, January 30, 2003 at 09:55:53 (PST) INTERESTED SITE, ENJOYED READING IT! NOTICED THAT ALOT OF PEOPLE ARE LOOKING FOR PARTS.. TRY HOLTS SUMMIT, MISSOURI 65043.. THERES SOOOO MANY M-H PARTS THERE, 3 POINT HITCH, YOU NAME IT , THEY MAY HAVE IT.... ANYWAYS I HAVE '49 MH 44 HIGH ARCH, ITS NICE TO HAVE ONE THAT WORKS VERY WELL AT THAT AGE! SHANNON BONE <SHANRB@NETZERO.COM> SAINT MARY, MO USA - Tuesday, January 21, 2003 at 01:36:26 (PST) I came across your site via a Ferguson link. I find your historical entries very interesting. Plan to read them at length soon. Kevin Kalmbach <klkalmbach @msn.com> Grand Rapids, MI USA - Monday, January 13, 2003 at 14:25:17 (PST) I have a model 20 that I am restoring. Need some sheetmetal and a waterpump. Any help would be greatly appreciated. Steve Miller <smi1616@cs.com> Mexico, NY USA - Sunday, January 12, 2003 at 21:26:54 (PST) I have a PTO from a Pony that I would like to trade for a PTO from an Oliver OC3 crawler or Oliver late HG crawler. My phone number is (204)452-9415. Lionel Charron <lcharron@shaw.ca> Winnipeg, MB Canada - Saturday, January 11, 2003 at 17:50:42 (PST) I would like to know where I could find a 3-point hitch for a 44. I have a 1953 23 Mustang that I am very proud of and a 1951 44. My dad has a 1947 30 wheatland that my grandfather bought new. If you know where I can find a 3-point hitch or other massey harris's e-mail me and tell me. Thank you , I like your collection. Mike Kunz <kunz682002@yahoo.com> Greensburg, IN USA - Monday, January 06, 2003 at 16:06:25 (PST) Really ejoyed your web site. My son Tony & I have just started redoing a Massey Harris 20. Would like to see your collection sometime. Tom Cremers <tom.c@mchsi.com> Paynesville , MN USA - Sunday, January 05, 2003 at 12:22:15 (PST) I like your site, and the great job you've done on your tractors. I just picked up a 49 Pony from a fellow who just lost interest in it. He had done all the hard work to it, I just need to finish it up. This one will look good next to my two Cubs and 9N.Take care John Norcross <HENJLN@AOL.com> New Milford, CT USA - Sunday, January 05, 2003 at 05:50:12 (PST) very nice site,glad to find other Massey Harris nuts like me.I own a 44 g/rc,44-6 g/rc and a 101 senior.I use them and love them all!!looking for a 44 special diesel. great job!! Kevin Foster <foster72@nett66.com> Potomac, Il USA - Saturday, January 04, 2003 at 17:17:24 (PST) Dad bought a Massey Harris 44 in 1950 and used it to plant corn.It had a mounted corn picker and a front mount cultivator.We are restoring it now and may need some info. Tim Kessler <kesslers@wabash.net> Louisville, IL USA - Thursday, January 02, 2003 at 05:54:09 (PST) I USED TO LIVE ON A DAIRY FARM NEAR ESSEX IA.I REMEMBER MY BROTHER AND FATHER BOTH HAVING 44`S.THEY WERE BOTH TURNED INTO HOTROD PULLING TRACTORS WITH CHRYSLER HEMI ENGINES AND AUTOMATIC TRANSMISSIONS COUPLED TO THE MASSEY TRANSMISSION.MY FATHER WON MANY EVENTS AND TROPHIES WITH HIS TRACTOR.THE ONLY TIME I SAW MY BROTHER PULL HE BROKE AN AXLE.THAT WAS ABOUT 35 OR36 YEARS AGO I WAS 4 OR 5 BUT STILL REMEMBER THEM WELL.MY FATHER ALSO HAD 2 SIMPSON TRACTORS TURNED INTO PULLING TRACTORS.I MISS THEM ALL. David Linquist <StripeInd@aol.com> Jacksonville, Fl USA - Sunday, December 08, 2002 at 17:36:12 (PST) Happy to have found your site...I am the owner of a restored 47' Pony. It was owned/ used by the town of Wells from 1950 - 1968 (I have maitnance records), in 1968 it was bought & used on a small farm until the summer of 2000 at which time it was sold at auction to a man named Robert Nicholas who spent more than 200 hour restoring the tractor. I bought the tractor this past summer & it won 1st place in the pre-1950 catagory at our local county fair. I have many original attachments for the Pony including a saw mill/ 2 plows/ sickle bar mowers & cultivators. My 3yr old son & I are entered into our towns Christmas parade w/ the Pony this year, it should be fun! Josh Hoffman <jandphof@gwi.net> Wells, ME USA - Wednesday, November 13, 2002 at 04:12:51 (PST) I've finally used the web and looked up your site. Great Job! We're the second owner of a 1949 44 STD. We've had it and the original plow since 1988. It's still in excellent shape. Thanks for honoring these old tractors. Don W. Peters Newton |